Filter
Top Products
Using your fax machine
19
10
Press the
ᮡ
and
ᮢ
buttons to scroll through
the options and press
OK/Menu to select the
option you require.
Call back
Call back allows you to interrupt a fax to speak
to the person at the other end.
To use call back
1 While the document is being sent or
received is complete, press
Hands Free.
The display will alternate between
TRANSMISSION, if a document is being sent, or
RECEPTION, if a document is being received
and
PHONE.
2 When the page that is being sent has gone
through, the other person’s telephone will
ring and if they pick up, your handset will
then ring.
3 Answer the handset as normal and speak.
Receiving a fax
You can set your DECTfax Plus to print faxes as
they are received or incoming faxes can be
stored in the memory, up to 20 Slerexe* pages,
and printed out at a later date. The default
setting is for memory receive to be switched on.
To switch off memory receive
When memory receive is off, you must ensure
paper is in the sheet feeder.
1 Press OK/Menu then 3 then 6. The display
shows 36 RX IN MEM.
2 Press OK/Menu. The display shows two
options:
YES Incoming faxes are stored in the
memory, even if there is paper in
the sheet feeder. This is the
default setting.
NO Incoming faxes are printed as
they are received. If there is no
paper in the sheet feeder, the
faxes are stored in the memory.
3 Use the
ᮡ
and
ᮢ
buttons to select NO. Press
OK/Menu to confirm the change.
If you want to cancel a delayed send simply remove
the document from the feeder. Or if the document is
to be sent from the memory see
‘
To cancel a timed
job
’
on page 25.
To send the faxes immediately simply press Start
after entering the last number.
D
E
F
3
M
N
O
6
* Slerexe is the name for the standard fax page.