Broadband Products PC5220 Network Card User Manual


 
6. If you prefer to have the Mobile Connection Manager launch automatically each time your
laptop PC starts up, click to checkmark the Run Mobile Connection Manager at Start up
checkbox. If you prefer to add the Mobile Connection Manager shortcut to your desktop, click
to checkmark the Desktop Shortcut checkbox. Click Next.
7. Wait for the Setup Status to load 100% and the window will close automatically.
8. Installation of the Mobile Connection Manager is complete. Click Finish or Ok.
9. Skip to step 11 if you did not check the option Run Mobile Connection Manager at Start up
from the Mobile Connection Manager Setup window (refer to step 6).
10. Skip to step 12 if you did check Run Mobile Connection Manager at Start up from the Mobile
Connection Manager Setup window (refer to step 6).
11. If you selected the Desktop Shortcut option only from the Mobile Connection Manager Setup
window (refer to step 6) in order to manually launch Mobile Connection Manager, double-click
on the Mobile Connection Manager Icon located on your desktop or access the Mobile
Connection Manager from the Start menu: Start>Programs>Mobile Connection Manager.
12. The Mobile Wireless Connection Manager will launch. Do not insert the PC5220 until you
have followed the instructions for driver installation and proper insertion of the PC5220.
See Connecting the PC5220 and Drivers to your Laptop PC.
NOTE— Windows
®
2000 and XP only:
Please read the “Signature Not Found” notice and click O
K
to proceed.
7
WINDOWS 2000 AND XP ONLY: A “Digital Signature Not Found” window may appear. Please disregard the notice
and click Yes or Continue Anyway to proceed with installation.
WINDOWS 98 ONLY:
Allow your computer to fully reboot before proceeding with the insertion of the PC5220 PC
Card and drivers.
WINDOWS ME ONLY:
If prompted to restart your laptop PC, it is recommended that you do so at this time before
proceeding with the insertion of the PC5220 PC Card and drivers.