Brother 1810 Network Card User Manual


 
50
To change the size setting:
1 While holding down , press once, and keep held down to dis-
play the current size setting.
2 While still holding down , continue pressing until the desired size set-
ting is displayed and is shown by the size indicator.
The current character size setting is also shown by the size indicator above
the display.
3 Release to apply the selected size setting to the entire text.
With the AUTO setting selected and 3/4” (18-mm)-wide tape installed, text
consisting of just one line of only capital letters will be printed with a charac-
ter size of 48 points.
24
36
Size
setting (in
points)
Width function OFF Width function ON
Size
Size