Filter
Top Products
41
The Auto cut function allows you to set whether or not the machine will automatically cut
each label after it is printed. Turn on the Auto cut function before starting to print in order to
cut the labels automatically after printing them.
☞ After printing a label with the Auto cut function set to OFF, hold down c and press
_ once to feed the tape, then cut it.
To turn the Auto cut function on or off:
1 While holding down c, press Z once, and keep c held down to display the
current auto cut setting.
2 While still holding down c, continue pressing Z until the desired auto cut setting
is displayed.
3 Release c to apply the selected auto cut setting.
EXAMPLE
4
Press h until 5.0 inch is displayed.
5 Press r.
To turn the Auto cut function on:
1
While holding down c, press Z once,
and keep
c held down.
5.0inch
LENGTH
AUTO CUT FUNCTION
OFF
AUTO CUT