Filter
Top Products
Configuration methods
13
2
Configuration using the PIN Method of Wi-Fi Direct 2
If your mobile device supports the PIN Method of Wi-Fi Direct, you can configure a Wi-Fi Direct network by
following these instructions.
a Press .
b Press Wi-Fi Direct.
c Swipe up or down, or press a or b to display PIN Code.
Press PIN Code.
d When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
e Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed. Press OK on
your machine. This will start the Wi-Fi Direct setup.
To cancel, press .
f Do one of the following:
When your Brother machine is the G/O (Group Owner), it will wait for a connection request from your
mobile device. When PIN Code appears, type the PIN displayed on your mobile device in to the
machine. Press OK. Follow the instructions and go to step h.
If the PIN is displayed on your Brother machine, input the PIN to your mobile device.
When your Brother machine is not the G/O (Group Owner), it will display available device names with
which to configure a Wi-Fi Direct network. Choose a mobile device you want to connect to and press
OK. You can re-search for available devices by pressing Rescan. Go to step g.
g Do one of the following:
Press Display PIN Code to display the PIN on your machine and input the PIN to your mobile
device. Follow the instructions and then go to step h.
Press Input PIN Code to input a PIN shown by your mobile device to the machine and then
press OK. Follow the instructions and then go to step h.
If your mobile device does not display a PIN, press on your Brother machine. Go back to step a
and try again.
h If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your
mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from
the Brother Solutions Center (http://solutions.brother.com/).
If the connection fails, see Troubleshooting on page 16.