Filter
Top Products
Configuration methods
15
2
Manual configuration for a Wi-Fi Direct network 2
If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network
manually.
a Press .
b Press Wi-Fi Direct.
c Swipe up or down, or press a or b to display Manual.
Press Manual.
d When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
e The machine will show the SSID name and Password for two minutes. Go to the wireless network
settings page of your mobile device and input the SSID name and password.
f If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For details on printing from or scanning to your
mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from
the Brother Solutions Center (http://solutions.brother.com/)
.
If the connection fails, see Troubleshooting on page 16.