Filter
Top Products
9
Configuration methods
2
Manual configuration for a Wi-Fi Direct network 2
If your mobile device does not support Wi-Fi Direct or WPS, you must configure a Wi-Fi Direct network
manually.
a Press a or b to choose Network.
Press OK.
b Press a or b to choose Wi-Fi Direct.
Press OK.
c Press a or b to choose Manual.
Press OK.
d When Wi-Fi Direct On? is displayed, press a to accept.
To cancel, press b.
e When Other Network I/F will be disabled. Do you want to continue? aOK bCancel
is displayed, press a to accept.
To cancel, press b.
f The machine will show the SSID name and Password for 2 minutes. Go to the wireless network settings
page of your mobile device and input the SSID name and password.
g If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device,
you can download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the
Brother Solutions Center (http://solutions.brother.com/)
.
If the connection failed, see Troubleshooting uu page 21.