Filter
Top Products
6
Configuration methods
2
One push configuration using WPS (Wi-Fi Protected Setup) 2
If your mobile device supports WPS (PBC; Push Button Configuration), you can configure a Wi-Fi Direct
network by following these instructions.
a Press a or b to choose Network.
Press OK.
b Press a or b to choose Wi-Fi Direct.
Press OK.
c Press a or b to choose Group Owner and then press OK.
d Press a or b to choose On and then press OK.
e Press a or b to choose Push Button.
Press OK.
f When Wi-Fi Direct On? is displayed, press a to accept.
To cancel, press b.
g When Other Network I/F will be disabled. Do you want to continue? aOK bCancel
is displayed, press a to accept.
To cancel, press b.
h When Activate Wi-Fi Direct on other device and press OK. is displayed, activate your
mobile device's WPS one push configuration method (see your mobile device's user's guide for
instructions) and then press OK on your machine. This will start the Wi-Fi Direct setup.
To cancel, press Back.
i If your mobile device connects successfully, the machine shows Connected.
You have completed the Wi-Fi Direct network setup. For information on printing from your mobile device,
you can download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from the
Brother Solutions Center (http://solutions.brother.com/)
.
If the connection failed, see Troubleshooting uu page 21.