Filter
Top Products
10
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the Machine” on pages 2 - 6.
1
Disconnect the machine from the power
socket and from the Macintosh
®
, if you have
already connected an interface cable.
2
Turn on your Macintosh
®
.
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here icon to install
the printer and scanner drivers. If the
language screen appears, select your
language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and
restart your Macintosh
®
.
7
Connect the USB interface cable to your
Macintosh
®
, and then connect it to the
machine.
To connect the USB cable to the machine:
1. Open the scanner cover to its open
position.
2. Connect the USB cable into the USB
socket, marked with a symbol. You
will find the USB socket above and to the
left of the ink cartridge slots, as shown
below.
3. Carefully guide the USB cable into the
trench as shown below, following the
trench round and toward the back of the
machine.
DO NOT connect the machine to a
USB port on a keyboard or a non
powered USB hub.
8
Turn on the machine by plugging in the
power cord.
9
From the Apple
®
menu, open the Chooser.
0
Click the Brother Ink icon you installed. On
the right side of the Chooser, select the
printer to which you want to print.
Close the Chooser.
The Brother Printer driver and Scanner
driver have been installed.
A
To install Presto!
®
PageManager
®
, click the
Presto! PageManager icon and follow the
on-screen instructions.
Presto!
®
PageManager
®
has been
installed and the installation is now
complete.
For Mac OS
®
9.1 to 9.2
You can easily scan, share and organize
photos and documents using Presto!
®
PageManager
®
.
Step 2