Filter
Top Products
51
STYLE FUNCTION
You can choose from nine different character styles to apply to your text.
☞
Characters printed using the smaller sizes may be difficult to read if certain style settings
(e.g., I+SHADOW) are selected.
The following style settings are available:
NORMAL I+BOLD (italic & bold)
BOLD I+OUTLINE (italic & outline)
OUTLINE I+SHADOW (italic & shadow)
SHADOW VERTICAL
ITALIC
The default style setting is NORMAL. The style indicator at the bottom right of the display
shows the current style setting when any setting other than NORMAL is selected.
Refer to
Reference
at the end of this section for samples of the available settings.
To change the style setting:
1 While holding down , press once, and keep held down to display the
current style setting.
2 While still holding down , continue pressing until the desired style setting is
displayed.
☞
The current style setting is shown by the style indicator at the bottom right of the
display.
3 Release to apply the selected style setting to the entire text.
EXAMPLE
To select the I+SHADOW style setting:
1
While holding down , press
once, and keep held down.
Style
Style
Style
NORMAL
STYLE
Alt
Caps
Undl/Frm
Length
Wide