Brother 2210 Printer User Manual


 
49
To change the size setting:
1 While holding down , press once, and keep held down to display the
current size setting.
2 While still holding down , continue pressing until the desired size setting is
displayed and is shown by the size indicators.
3 Release to apply the selected size setting to the entire text.
With the AUTO setting selected and 3/4” (18-mm) or 1” (24-mm)-wide tape
installed, text consisting of just one line of only capital letters will be printed with a
character size of 48 point.
EXAMPLE
To select the 24 point size setting:
1
While holding down , press
once, and keep held down.
2 While still holding down , continue
pressing until 24 is displayed.
3 Release .
Size
Size
Size
AUTO
SIZE
Alt
Caps
Undl/Frm
Length
Wide
Size
24
SIZE
Alt
Caps
Undl/Frm
Length
Wide