Filter
Top Products
20
☞
Hold the tape very firmly and do not move it while rubbing the tape.
IRON-ON TRANSFER TAPE
Iron-on transfer tape is used to transfer your text onto garments using an iron.
1
Insert an iron-on transfer tape cassette, press
p
to print the text, then push down on
the tape cutter lever to cut off the label.
2
Iron the garment to flatten it before transferring the text.
3
Place the label on the garment at the location where you wish the text to be transferred.
4
Set the iron to cotton (150 to 180 ˚C), and then press down on the label with the iron for
about 15 seconds.
5
Allow the iron-on transfer to cool (for about 60 seconds), and then carefully remove the
backing paper.
☞
White garments made from 100% cotton with a plain (smooth) surface are best for iron-
on transfers.
You can also make transfers to garments made from 100% linen or cotton/polyester
blends as long as they have a plain (smooth) surface.
The label will not adhere properly to any cloth with a rough surface, such as pile or
denim, or with a waterproof surface. Heat-sensitive materials, such as nylon, acetate or
other similar fibres, are also unsuitable as they may be damaged when pressing with an
iron at a high temperature.
Do not move the iron while pressing, otherwise the label may move out of the desired
position. Press the iron straight down onto the cloth.
ABC
P
-TO
U
C
H