Filter
Top Products
117
The FEED function allows you to select the size of the margins on the left and right side of
your test.
The default setting is FULL; however, three other settings are also available.
FULL (1” (25 mm))
NONE (1/6” (4 mm))
NERROW (1/3” (8 mm))
MEDIUM (1/2” (12 mm))
+ The FEED function can only be applied to the entire text; it cannot be applied to just
part of the text.
Since reducing the tape feed may decrease bar code readability, the FULL tape feed
setting is recommended when the text contains bar codes
If an instant-lettering (rub-on transfer) or an iron-on transfer tape cassette is installed,
the text will be printed with the FULL setting (1” (25 mm)-margins), even if a different
setting was selected.