Brother 550 Printer User Manual


 
19
Occasionally, specks of dust or dirt become attached to the machine’s print head and rollers.
This is particularly likely when you are using the unit outdoors or in a very dusty environment.
If a section of the print head is covered with dust, a blank horizontal streak may
appear through the text in the printed label.
Therefore, as with a tape recorder, the machine’s head may need to be cleaned from time to
time.
TO CLEAN THE PRINT HEAD
Ê Turn off the machine.
Ë Open the tape compartment cover, then remove the tape cassette if one is installed.
The print head and rollers are located in the tape compartment.
Ì Print head: Use a dry cotton swab to gently wipe the print head with an up-and - down
motion.
Rollers: Use a dry cotton swab to wipe each roller with an up-and-down motion while
rotating them with your finger.
Í Try printing again.
If dust still remains:
Î Repeat step Ì using a cotton swab dipped in isopropyl (rubbing) alcohol.
If none of the above works, contact your service representative.