Filter
Top Products
78
Machine Information B
Checking the serial number B
You can see the machine’s serial number on
the LCD.
a Press Menu.
b (DCP-193C, DCP-195C and
DCP-197C)
Press a or b to choose
4.Machine Info.
Press OK.
(DCP-365CN, DCP-373CW,
DCP-375CW and DCP-377CW)
Press a or b to choose
5.Machine Info.
Press OK.
c Press a or b to choose 1.Serial No.
Press OK.
XXXXXXXXX
d Press Stop/Exit.
Reset functions B
The following reset functions are available:
1 Network
(DCP-365CN, DCP-373CW, DCP-375CW
and DCP-377CW only)
You can reset the print server back to its
default factory settings such as the
password and IP address information.
2 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you use this
operation when you dispose of the
machine.
Note
Unplug the interface cable before you
choose Network or All Settings.
How to reset the machine B
a Press Menu.
b Press a or b to choose
0.Initial Setup.
Press OK.
c Press a or b to choose 4.Reset.
Press OK.
d (DCP-365CN, DCP-373CW,
DCP-375CW and DCP-377CW only)
Press a or b to choose the reset function
you want to use.
Press OK.
e Press a or b to choose a Reset or
b Exit.
f Press a to confirm.