Filter
Top Products
2 - 14
ASSEMBLY AND CONNECTIONS
Multi-Line Connections (PBX)
Most offices use a central telephone system. While it is often relatively simple
to connect the machine to a key system or a PBX (Private Branch Exchange),
we suggest that you contact the company that installed your telephone system
and ask them to connect the machine for you. It is advisable to have a separate
line for the machine. You can then leave the machine in FAX mode to receive
faxes any time of day or night.
If the machine is to be connected to a multi-line system, ask your installer to
connect the unit to the last line on the system. This prevents the unit from being
activated each time a telephone call is received.
If you are installing the machine to work with a PBX:
1
It is not guaranteed that the unit will operate correctly under all circumstances
with a PBX. Any cases of difficulty should be reported first to the company that
handles your PBX.
2
If all incoming calls will be answered by a switchboard operator, it is
recommended that the Receive Mode be set to MANUAL. All incoming calls
should initially be regarded as telephone calls.
3
The machine may be used with either pulse or tone dialing telephone service.
Custom Features on Your Phone Line
If you have Voice Mail, Call Waiting, Call Waiting/Caller ID, RingMaster, an
answering service, or an alarm system, or other custom feature on one phone
line, it may create a problem with the operation of your fax machine. (See I have
difficulty with custom features on a single line, Page 13-8.)
As with all fax units, this machine must be connected to a two wire system. If
your line has more than two wires, proper connection of the machine cannot be
made.