Filter
Top Products
CHAPTER 5 MAINTENANCE
5-15
4.
Take the Fuser Cleaner out of
the Fusing Unit by holding the
handle of the Fuser Cleaner as
shown:
Fig. 5-9
5.
Install the new Fuser Cleaner
into the guide with the roller
side facing you.
Fig. 5-10
6.
Lock the Fuser Cleaner with the Oil Bottle Lock Levers.
7.
Close the Top Cover.
8.
Press the
Power
button to turn the printer On.
9.
Press any of the
Menu
buttons (
+
,
–
,
Set
or
Back
) to take the printer Off
Line.
10.
Press
+
or
–
until “RESET MENU” appears.
11.
Press
Set
to proceed to the next menu level, and then press
+
or
–
until
“PARTS LIFE” appears.
12.
Press
Set
, and then press
+
. “FC ROLLER” appears.
13.
Press
Set
, and then press
Go
. The printer is now in the READY state.