Brother HL-4040CDN Printer User Manual


 
Setting Up the Machine
14
STEP 1
5 Plug the AC power cord into an AC power
outlet. Turn on the printer power switch.
6 After the printer has finished warming up, the
LCD shows Ready.
7 Press Go. The printer prints a test page. Check
that the test page has printed correctly.
Note
If you press Reprint, the printer prints a duplex
test page. (For HL-4050CDN)
This function will not be available after the first
print job you send from your computer.
6 Setting your language on the
control panel
1 Press the + or button until the LCD shows
General Setup.
Press OK.
Select ab or OK
General Setup
2 Press OK again.
General Setup
Local Language
3 Press the + or button to choose your
language. Press OK to accept.
Local Language
English