Filter
Top Products
4
4
Print a test page
a Make sure that the printer power switch is off.
Connect the AC power cord to the printer.
b Turn on the printer power switch.
c Unfold support flap1.
d After the printer has finished warming up, the
LCD shows READY.
e Press Go. The printer prints a test page. Check
that the test page has printed correctly.
5
Setting your language on
the control panel
a Press + until the LCD shows SETUP.Press
Set.
SETUP
b Press Set again.
LANGUAGE
c Press + or – to choose your language. Press
Set to accept.
=ENGLISH
Now go to
Go to the next page to install the printer driver.
IMP
O
RTANT
DO NOT connect the interface cable yet.
Note
This function will not be available after the first
print job you send from your computer.