Filter
Top Products
2001/10/02
APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 6
3.1.6. PJL job offset on/off
Format
@PJL SET/DEFAULT JOBOFFSET=ON/OFF
Parameter
• ON: Paper is ejected offset by each job.
• OFF: Paper is ejected together.
Default = ON
Explanation
• This command selects the job offset.
• This command is ignored when the Finisher/Stapler unit is not available.
• The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.
3.1.7. PS job offset on/off
Command
Parameter
bool
• True: Paper is ejected offset by each job.
• False: Paper is ejected together.
Default = false
Explanation
• This command selects the job off set.
• This command is ignored when the Finisher/Stapler unit is not available.
<Example>
<<BRjoboffset true>>setpagedevice
3.1.8. PCL job separate (Esc&l1T)
Command
Esc&l1T (27)(38)(108)(49)(84) <1Bh><26h><6ch><31h><54h>
Explanation
• This command separates the job.
• This command is ignored when the Finisher/Stapler unit is not available.