Brother HL-5050 Printer User Manual


 
ABOUT THIS PRINTER 1 - 1
1
What is in the box?
When you unpack the printer, check to see that you have all of the following parts.
1
Printer
2
Drum Unit Assembly
(with Toner Cartridge included)
3
Quick Setup Guide
4
CD-ROM
5
AC Power Cord
Components may differ from one
country to another.
Interface cable
An interface cable is not a standard accessory.
Some computers have a USB and a parallel port. Please buy the appropriate cable for the interface
you are going to use.
Most parallel cables support bi-directional communication, but some might have an incompatible pin
assignment or may not be IEEE 1284-compliant.
It is recommended to use a Parallel interface cable or USB interface cable that is no longer than 6
feet (2 metres).
When you use a USB cable, make sure it is a high-speed twisted cable (12 Mbps or 480 Mbps), and
that you connect it to the USB connector of your PC.
Please make sure that you use a Hi-Speed USB 2.0 certified cable if your computer uses a Hi-Speed
USB 2.0 interface.
Do not connect the USB cable to the front of your PC or to the iMac’s keyboard.
The HL-5030 only supports the USB interface.
About this printer
The power cord may be slightly different than the one in the figure above, depending on which
country the printer was bought in.
1
2
3
4
5