Filter
Top Products
PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
123
12
j The file name is set automatically
however, you can set a name of your
choice using the dial pad. Press a or b to
choose File Name. Enter the new
name. (See Entering Text on page 204.)
You can only change the first 6 digits.
Press OK.
Note
Press Clear/Back to delete the current
name.
k Press Black Start or Color Start.
Glass Scan Size
(MFC-6490CW only) 12
To scan a Legal, Ledger, A3 or A4 size
document, you need to change the
Glass ScanSize setting. The default
setting is Letter.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Glass ScanSize.
d Press d or c to choose Letter, Legal,
Ledger, A3 or A4.
Press OK.
Note
• You can save the setting you use most
often by setting it as the default. (See
Setting your changes as the new default
on page 121.)
• This setting is only available for scanning
documents from the scanner glass.
How to change the file name 12
You can change the file name.
a Press (Scan).
b Press a or b to choose
Scan to Media.
c Press a or b to choose File Name.
d Enter the new name using the dial pad.
You can only change the first 6 digits.
(See Entering Text on page 204.)
How to set a new default 12
You can set your own default settings.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Set New Default.
Press OK and 1 to choose Yes.
d Press Stop/Exit.
How to reset to the factory
settings 12
You can restore all the settings you have
changed to the factory settings.
a Press (Scan).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Factory Reset.
Press OK and 1 to choose Yes.
d Press Stop/Exit.