Filter
Top Products
160
f Lift the scanner cover (1) from the front
side of the machine until it locks
securely into the open position. Make
sure that there is no jammed paper left
inside the machine.
Note
• If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
• If the print head has stopped in the right
corner as shown in the illustration, you
cannot move the print head. Press
Stop/Exit until the print head moves to the
middle. Then unplug the machine from the
power source, and take out the paper.
• If ink gets onto your skin, immediately
wash it off with soap or detergent.
g Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3) using both hands.
h Push the paper tray firmly back into the
machine.
Note
Make sure you pull out the paper support
until it clicks.
1
1
2
3