Filter
Top Products
36
5
Entering Fax mode 5
When the machine is idle, the time appears
on the LCD. When you want to send a fax, or
change fax send or receive settings, press
the (Fax) key to illuminate it in blue.
The LCD shows:
Press d or c to scroll through the Fax key
options. Some functions are only available
when sending black & white faxes.
Fax Resolution (See page 41.)
Contrast (See page 40.)
Broadcasting (See page 39.)
Preview (See page 38.)
Delayed Fax (See page 42.)
Batch TX (See page 42.)
Real Time TX (See page 41.)
Polled TX (See page 91.)
Polling RX (See page 90.)
Overseas Mode (See page 42.)
Glass ScanSize (See page 37.)
Set New Default (See page 43.)
Factory Reset (See page 43.)
Press the option you want.
Faxing from the ADF 5
a Press (Fax).
b Place the document face down in the
ADF. (See Using the ADF on page 21.)
c Enter the fax number using the dial pad.
You can also enter the fax number by
pressing Speed Dial, press the
number you want and press
Send a fax.
(For details, see How to Dial
on page 75.)
Note
You can preview a fax message before
sending it by setting Preview to On.
For details, See How to preview an
outgoing fax on page 38.
d Press Black Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax when the
memory is full it will be sent in real time.
Sending a Fax 5
FAX/TEL
FAX/T EL
Fax Resolution
Standard
Standard
Contrast
Auto
Auto
Broadcasting
Off
Off
Speed DialHistory