Brother MFC-790CW All in One Printer User Manual


 
Telephone Services and External devices
73
7
External and extension
telephones
7
Connecting an external or
extension telephone 7
You can connect a separate telephone or
telephone answering device directly to your
machine as shown in the diagram below.
Connect the telephone line cord to the jack
labeled EXT.
Before you connect the external telephone
answering machine, remove the protective
cap (3) from the EXT. jack on the machine.
1 Extension telephone
2 External telephone
When you are using an external or extension
telephone, the LCD shows
Ext. Tel in Use.
Using external and extension
telephones 7
Using extension telephones 7
If you answer a fax call on an extension
telephone, you can make your machine
receive the fax by pressing the Fax Receive
Code l 51.
If the machine answers a voice call and
pseudo/double-rings for you to take over, use
the Telephone Answer Code #51 to take the
call at an extension telephone. (See F/T Ring
Time (Fax/Tel mode only) on page 48.)
Using an external telephone
(connected to the EXT. jack of the
machine)
7
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Speaker Phone
followed by Black Start.
If you answer a call and no one is on
the line:
7
You should assume that you're receiving a
manual fax.
Press l 51 and wait for the chirp or until the
LCD shows Receiving, and then hang up.
Note
You can also use the Easy Receive
feature to make your machine
automatically take the call. (See Easy
Receive on page 49.)
1
2
3