Brother MFC-790CW All in One Printer User Manual


 
Chapter 8
82
Dialing Access codes and
credit card numbers 8
Sometimes you may want to choose from
several long distance carriers when you
make a call. Rates may vary depending on
the time and destination. To take advantage
of low rates, you can store the access codes
of long-distance carriers and credit card
numbers as Speed Dial numbers. You can
store these long dialing sequences by
dividing them and setting them up as
separate Speed Dial numbers in any
combination. You can even include manual
dialing using the dial pad. (See Storing
Speed Dial numbers on page 77.)
For example, you might have stored ‘555 ’ on
Speed Dial: 03 and ‘7000 ’ on Speed Dial: 02.
You can use them both to dial ‘555-7000’ if
you press the following keys:
a Press Speed Dial.
b Press #03.
c Press Send a fax or
Make a phone call.
d Press Speed Dial.
e Press #02.
f Do one of the following:
To make a telephone call, press
Make a phone call.
To send a fax, press Send a fax.
Go to step g.
g Press Black Start or Color Start.
You will dial ‘555-7000 ’.
To temporarily change a number, you can
substitute part of the number with manual
dialing using the dial pad. For example, to
change the number to 555-7001 you could
press Speed Dial, choose 03, press
Send a fax or Make a phone call, and
then press 7001 using the dial pad.
Note
If you must wait for another dial tone or
signal at any point in the dialing sequence,
create a pause in the number by pressing
Pause. Each key press adds a 3.5-second
delay.