Brother MFC9465CDN All in One Printer User Manual


 
118
Registration Registration failed. Press Mono Start or Colour Start and try
again.
Do one of the following:
Turn off the machine’s power switch.
Wait a few seconds, then turn it on
again.
Try Manual Registration, Menu, 4, 8.
(See Manual Registration on page 111.)
Put in a new belt unit. (See Replacing
the belt unit on page 81.)
If the problem continues, call your
Brother dealer.
Rename the File There is already a file on the USB
Flash memory drive with the
same name as the file you are
trying to save.
Change the file name of the file on the USB
Flash memory drive or the file you are trying
to save.
Replace Parts
Belt Unit
It is time to replace the belt unit. Replace the belt unit. (See Replacing the
belt unit on page 81.)
Replace Parts
Drum
It is time to replace the drum unit. Replace the drum unit.
(See Replacing the drum unit on page 75.)
The drum unit counter was not
reset when a new drum was
installed.
Reset the drum unit counter.
(See Resetting the drum counter
on page 80.)
Replace Parts
Fuser Unit
It is time to replace the fuser unit. Call your Brother dealer or a Brother
Authorized Service Center to replace the
fuser unit.
Replace Parts
PF Kit 1
PF Kit 2
PF Kit MP
It is time to replace the paper
feeding kit.
Call your Brother dealer or a Brother
Authorized Service Center to replace the
PF Kit.
Replace Toner The toner cartridge is at the end
of its life.
Replace the toner cartridge for the colour
indicated on the LCD. (See Replacing a
Toner cartridge on page 68.)
Replace WT Box It is time to replace the waste
toner box.
Replace the waste toner box. (See
Replacing the waste toner box on page 86.)
Scan Unable XX
(XX = Error Code)
The machine has a mechanical
problem.
Turn the power switch off, and then turn
it on again. (See Transferring your faxes
or Fax Journal report on page 120.)
If the problem continues, call your
Brother dealer.
Document is too long for duplex
scanning.
Press Stop/Exit. Use the suitable size of
paper for duplex scanning. (See Print media
on page 176.)
Error Message Cause Action