Filter
Top Products
43
Sending Faxes
Quick Scan Fax Transmission
You can scan a fax into the FAX/MFC’s memory to be sent as soon as the scan is
complete. This way, you don’t have to wait for the entire fax to be transmitted
before you retrieve your original.
If you get a MEMORY FULL message while scanning the first page of a fax, press
Stop
to cancel the scan. If you get a MEMORY FULL message while scanning in a
subsequent page, you’ll have the option to press
Start
to transmit the pages
scanned so far, or to press
Stop
to cancel the Quick Scan operation.
1
Insert the document in the feeder.
2
Press
Q.Scan
. The screen indicates how much memory is available.
3
Enter the fax number.
4
Press
Start
to begin scanning the document into memory. Once the scan is
complete, the FAX/MFC dials the call.
Daily Timer
You can use this function to set a time to send a fax every day. The setting stays
the same until you change it. Then, when you use Delayed Transmission the time
will be displayed automatically.
1
Press
Function
,
7
,
2
.
2
Use the dial pad to enter the time in 24-hour format (for example, enter
19:45 for 7:45 PM).
3
Wait 2 seconds, then press
Stop
to exit.
7
CHAPTER SEVEN
Advanced
Fax Operatio
n
See
Delayed
Transmission
p. 44
and
Delayed
Polling
p. 55