Brother NC-9100H Printer User Manual


 
TCP/IP PRINTING 2 - 6
NC9100h_FM6.0
Windows NT
®
4.0 Printing
Associating to the Printer
You must now create a printer on your Windows
®
system using the
standard Windows
®
printer setup procedure.
1
To do this, go to the Start button, select Settings and then
Printers.
2
Double click the Add Printer icon to get the Add Printer
Wizard.
3
Select My Computer (not Network Printer) and click on Next.
4
Select the Brother LPR Port (the port name you assigned in step
6 of the “Installing Brother Peer to Peer Software” section in this
chapter) and click on Next.
5
Select the desired printer model. If the correct model is not
displayed, click on the Have Disk option and insert the CD-
ROM supplied with your printer.
6
If the driver already exists, select Keep Existing Driver (if it
does not exist, this step will be skipped), and then click on Next.
7
If desired, change the name of the printer then click Next.
8
If desired, make the printer shared (so other user can access it),
and select the operating system(s) that these other computers
will be running. Click on Next.
9
Select Yes when you asked Would you like to print a test
page?. Click on Finish to complete the installation. You may
now print to the printer as if it were a local printer.