Brother PT-18R Printer User Manual


 
LABEL PRINTING
44
Printing a Label
Press the key.
The message shown on the right is displayed while
the label is being printed.
Printing Multiple Copies
Using this function you can print up to 99 copies of the same label.
Make sure that the appropriate tape cassette is inserted and ready for printing.
Hold down the key and press the key to
display the print options screen, and then select
“Copies” using the or keys.
Press the key to display the Copies screen, and
then select the number of copies to be printed using
the or keys, or type the number using the
number keys.
Press the key.
The message shown on the right is displayed while
the labels are being printed.
2
To stop printing, press the key to turn off the P-touch.
When the battery is low the message “Recharge Battery!” appears after printing. Recharge the
battery before continuing printing, or connect the AC adapter directly to the P-touch to
continue printing.
There are several other messages that may appear when you press the key. Refer to “Error
Messages” on page 58 and check the meaning of any messages that appear.
1
2
Hold down the or keys to change the number of
copies in increments of 5.
3
4
Press the key to return to the previous step.
Unless set otherwise, the tape is automatically cut after each copy is printed. Refer to “Tape
Cutting Options” on page 47 to change this setting.
The figures shown on the screen during printing indicate the “count / number of copies set”.
Pressing the key when setting the number of copies resets the value to 1, the
default.