Filter
Top Products
13
Label Type Modes
● BLK LEN. (block length): * For the PORT Label Type mode:
0.80" to 8.00" (20 to 200 mm)
Default: 1.20" (30 mm)
* For the PANEL Label Type mode:
0.25" to 8.00" (6 to 200 mm)
Default: 1.20" (30 mm)
● FRAME: * For the PORT Label Type mode:
OFF, 1 , 2 , 3 , 4
Default: OFF
* For the PANEL Label Type mode:
OFF, 1 , 2 , 3 ,
4 , 5 , 6 ,
7 , 8 , 9
Default: OFF
● PRINT (print order): FRONT, REVERSE
Default: FRONT
☞ For these types of labels, we recommend using Extra Strength Adhesive Tape.
☞ The PRINT parameter is only available with the PANEL Label Type mode.
☞
Using the Numbering function with the PANEL Label Type mode makes it easy to
create a single label of multiple blocks containing incremental characters, which can
be used, for example, to label patch panels as shown above.
1 Choose Label Type PANEL.
2 Type in one block of text.
3 Use the numbering function under
g a
to choose the corresponding
field to be incremented and the number of sequential labels to be printed.