Filter
Top Products
Remote Printer Console Menu Table
3 - 5
3
IBM Font Number The number of fonts available
vary by model.
Selects the default font from the fonts list.
Font Pitch/Point Size Font Pitch: 0.1 to 576.0
Point Size: 0.25 to 999.75
Selects the font pitch or point size.
Character Set The Symbol Set available will
vary by model.
Selects the symbol set.
Auto LF on (CR → CR + LF)
off (CR → CR)
Selects whether a line feed will happen
when the printer reaches the right margin.
Auto CR on (LF → LF + CR,
FF → FF + CR,
VT → VT + CR)
off (LF → LF,
FF → FF,
VT → VT)
Selects whether a carriage return will
happen when the printer position reaches
the right margin.
Auto Mask off, on By selecting off, a line feed and carriage
return will happen when the printer position
reaches the bottom margin.
Left Margin xx column(s) Sets the left margin at 10 cpi.
Right Margin xx column(s) Sets the right margin at 10 cpi.
Top Margin 0, 0.33, 0.5, 1.0, 1.5, 2.0
inches
Selects the top margin at a distance from
the top edge of the paper.
Bottom Margin 0, 0.33, 0.5, 1.0, 1.5, 2.0
inches
Selects the bottom margin at a distance
from the bottom edge of the paper.
Lines xx line(s) Sets the number of lines on each page.
Network IP Address [000-255].[000-255].
[000-255].[000-255]
Sets the IP Address.
Subnet Mask [000-255].[000-255].
[000-255].[000-255]
Sets the Subnet Mask.
Gateway [000-255].[000-255].
[000-255].[000-255]
Sets the Gateway.
Interface Auto Interface Timeout 1 to 99 sec. You need to set the time-out period for the
auto interface selection.
Input Buffer (Level) 1 to 15 Increases or decreases the input buffer
capacity.
Parallel High-Speed on, off Turns high-speed parallel communication
ON or OFF.
Bi-Dir on, off Turns bi-directional parallel
communications ON or OFF.
Input Prime on, off Turns prime signal ON or OFF.
USB 2.0 Hi-Speed on, off Turns High-Speed USB 2.0 communication
ON or OFF.
Main menu Sub menu Options Descriptions