Remote Printer Console Menu Table
3 - 6
3
Custom MP First off, on Selects whether to feed paper from the
Multi-purpose (MP) tray as a priority.
This function is available only for models
which have the MP tray.
Sleep Mode on, off Turns the sleep mode ON or OFF.
Sleep Indication off, Dimmed Selects whether the LED is to go off or be
dimmed when the printer is in sleep mode.
Toner Low Indication Normal, Delay, off You need to select Delay if you want the
Toner Low LED indication to appear when
the toner amount becomes lower than the
default Normal setting.
Printer Language English, French, German,
Dutch...
Selects the language you want to use.
The printer driver setting overrides the
Remote Printer Console setting. If you once
send the data to printer using the printer
driver, the printer’s language setting will be
changed.
Reprint Mask off, on If you want to disable the Reprint function,
select on. This setting overrides the printer
driver Reprint setting.
Thick Font off, on If you select on, Brougham font will be
replaced by bold Brougham font.
IP Conifg AUTO, DHCP, BOOTP,
RARP, STATIC
Selects a method to configure IP address.
This function is available only for the
network-ready model.
APIPA Enable, Disable Turns the APIPA function enable or disable.
This function is available only for the
network-ready model.
Net Memory Level 1 to 15 Selects the capacity of memory which is
used for network function.
This function is available only for the
network-ready model with Upnp support.
Advanced Command - This function is used for specific service
functions.
Main menu Sub menu Options Descriptions