Brother TN 460 Printer User Manual


 
UNINET IMAGING INC. BROTHER 1240/1650 ASSEMBLING THE OPC CARTRIDGE
26. Replace the transfer roller together with its saddles and the
helical gear.
28. Slide the axle from left to right, insert the bearing in place
and the retaining washer to secure the axle in place.
27. Replace the OPC drum by mounting the clutch and spring on
the right side and engage the drive gear on the left. NOTE: Before
inserting the axle lift the spring loaded contact wire located
between the drive gear of the OPC and the side of the cartridge.
29. Insert the drum cleaning assembly and with a Phillips screw-
driver and tighten the screws to secure it to the cartridge. The
screw on the left will pressure the contact between the assem-
bly and the drum axle.
UNINET IMAGING INC. BROTHER 1240/1650 ASSEMBLING THE TONER CARTRIDGEUNINET IMAGING INC. BROTHER 1240/1650 DISASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. BROTHER HL 1240/165 (TN 430/460) CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2007 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not guarantee or warrant downloaded information.
www.uninetimaging.com/technical.asp
11124 Washington Blvd., Culver City, California USA 90232 • Ph +1 310 280 9620 • Fx +1 310 280 0533 • techsupport2@uninetimaging.com