Filter
Top Products
11
1. Power down the Cable or DSL modem and the computer which will be used to confi gure the
AirStation router.
2. Plug the Cable or DSL’s LAN Ethernet cable into
the AirStation’s WAN port. Initially, you may need
to unplug this cable from your computer, hub or
other router.
3. Plug the provided Ethernet cable into a LAN
port on the AirStation and plug the other end into
your computer Ethernet adapter’s (NIC) port. If
you plan to initially confi gure the AirStation via a
wireless connection, (not recommended), you may
skip this step.
4. Power on your cable or DSL modem, wait one
full minute, Power on the AirStation router, wait
another full minute and then power on the com-
puter which will be used to confi gure the AirStation.
If the red DIAG light on the AirStation is lit or fl ashing after several minutes of being powered on,
please consult Buffalo Technical Support.
Installation / Setup