Buffalo Technology LPV2-USB-TX1 Switch User Manual


 
To view the information about the USB Print Server, press the
Information’ tab. This tab will display the current information about
the USB Print Server.
To reset the device or to restore the factory default settings, press the
Reset’ tab.
8
Restart: Reboots the USB Print Server
Set to Factory Default: Restores the factory default settings.
Once all settings have been changed, save the settings by pressing the
OK’ button.
NOTE: Future configuration can be done using your web browser.
Browse to http://xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the configured IP
address of the Print Server.)