Filter
Top Products
8
Additional Information:
AOSS (AirStation One-Touch Secure System)
The WHR-HP-G54 supports Buffalo’s AOSS system for connecting AOSS
compatible wireless clients to the WHR-HP-G54. For information about AOSS,
please refer to the AOSS Supplement which is included in the WHR-HP-G54
package contents.
IP Addressing
To verify your IP settings for static or automatic addressing, click Start, select
Settings (if present) and click Control Panel. Within Control Panel, double-click
Network or Network Connections. You can then right-click on any of your wired or
wireless connections and select Properties. Within the properties, you can view the
properties of your TCP/IP protocol.
Generally, you will want to be sure that Obtain an IP address automatically
is selected to allow easier connections. To manually renew IP addressing
confi gurations for your connection, follow these steps:
• Click Start and Run. A dialog box will appear where you can type cmd into
the fi eld provided and click
OK.
• An MS-DOS prompt will launch. Enter
IPCONFIG /RELEASE and press the
Enter key on the keyboard to release your current IP confi guration. Next,
enter IPCONFIG /RENEW and press the Enter key to seek new settings from
a DHCP server. (This may take a few moments).
• Type
IPCONFIG /ALL. This will display all the IP confi gurations for your wired
or wireless connection.
• The Default Gateway address listed in the results is usually the IP address of
the AirStation. If no IP addresses are listed or your wireless adapter displays
a 169.254.XXX.XXX address, retrace the setup steps to verify correct
installation.
• Type
EXIT to close out the DOS window.