Filter
Top Products
4
Step
Configure your computers IP address
Refer to your Operating System for further instructions on how to navigate
to your TCP/IP Properties.
For Windows 98SE/ME
- Right-click on Network Neighborhood or My Network Places
and
select Properties.
- Select the Configuration tab, scroll down to TCP/IP and press Properties.
- Click Specify an IP address
- IP address = 192.168.11.2
- Subnet mask = 255.255.255.0
- Click OK to close Internet Protocol (TCP/IP) Properties.
- Click OK to close Network Connection Properties.
- Close Network Connections window.
For Windows 2000/XP
- Click Start => Settings => Control Panel => Network
Connections.
- Right-click on Local Area Network Connection and select
Properties.
- Scroll down to Internet Protocol (TCP/IP ) and press Properties.
- Select Use the following IP address
- IP address = 192.168.11.2
Step
Access the AirStation configuration page
Launch your Web browser and type 192.168.11.1 in the address field of the Web
browser window and click “Go” or press “Enter.”
If you have previously modified the AirStation and changed the LAN IP address,
enter the custom LAN IP address to access the AirStation configuration page.