Filter
Top Products
6
This completes the basic AirStation Configuration. To change advanced set-
tings consult the Buffalo Support Web Site:
http://www.buffalotech.com/wireless/support.
Connect the AirStation to your existing LAN
Once configuration is complete, connect the AirStation to your existing Local Area
Network. Plug the provided 7ft. Ethernet cable into any one of the four 10/100M
Ethernet ports on the AirStation 54 Mbps* Bridge Base Station and plug
the other end into an Ethernet hub or switch on your Local Area Network.
The LAN or Wired MAC address
is the default ESS-ID (SSID) of the
AirStation. The LAN MAC address is
located on the rear of the AirStation
clearly labeled next to the 4-port
switch.
The Wireless MAC address of the
AirStation is used for WDS functionality.
MAC Address and SSID
Once the AirStation is connected to the existing LAN, users accessing the
LAN through the AirStation must configure the computer’s TCP/IP Settings
to match your existing LAN.
Contact your network administrator if your computer requires a static
IP Address or if using DHCP Services.