Buffalo Technology WZR-AG300NH Network Router User Manual


  Open as PDF
of 7
 
4
Step 2: Configure Your Router
Next, you need to congure your router. This is done from a web browser on a computer
connected to the router. We recommend that you use a wired computer that is plugged into the
AirStation with an Ethernet cable for initial conguration.
1. Launch the web browser on the computer that you’re going to use to congure the AirStation.
NOTE: The computer used to congure the AirStation should be set to obtain an IP address
automatically using a DHCP server.
2. Your web browser should automatically attempt to load a web page. If the default web page
loads then the AirStation has automatically congured your Internet connection settings.
Please skip to the next page if you have successfully
connected to the Internet.
3. If the AirStation cannot automatically congure itself
for your Internet Connection, then a window will open,
prompting you to enter a User ID and Password.
Enter root as the User name and leave the password eld
blank.
NOTE: If your web browser doesn’t automatically connect
you to the AirStation Conguration Utility, then type
http://192.168.11.1 in its address eld, and press Enter.
4. The AirStation will provide different conguration options depending on what it has auto-
detected. Please manually enter your specic connection information. This information can
be supplied by your Internet Service Provider; contact them for account specic information.
 previous next