Filter
Top Products
TIMING SPECIFICATION
1) 2) 3) 4) 5) 6) 7)
Item Symbol min. typ. max. unit
Horizontal Scanning Term th 1334 x tc 1344 x tc - clock
H-sync Pulse Width thw 4 x tc 136 x tc - clock
Horizontal Front Porch thfp 4 x tc 24 x tc - clock
Horizontal Back Porch thbp 24 x tc 160 x tc - clock
Horizontal Data Sync Period thds 32 x tc 296 x tc - clock
Horizontal Display Term thd 1024 x tc 1024 x tc 1024 x tc clock
Frame Period tv 778 x th 806 x th 860 x th line
V-sync Pulse Width tvw 2 x th 6 x th - line
V-sync Set Up Time (to H-sync) tvsu 8 x tc - - clock
V-sync Hold Time tvhd (thbp+16) x tc - - clock
Vertical Front Porch tvfp 1 x th 3 x th - line
Vertical Back Porch tvbp 2 x th 29 x th - line
Vertical Data Sync Period tvds 8 x th 35 x th - line
Vertical Display Term tvd 768 x th 768 x th 768 x th line
Clock Period tc 15.0 15.38 - ns
Note 1) Refer to “Timing Chart” and LVDS (THC63LVDF84A-85) specifications by THine Electronics, Inc.
corporation.
Note 2) If DE is fixed to "H" or "L" level for certain period while NCLK is supplied, the panel displays black with some flicker.
Note 3) If NCLK is fixed to "H" or "L" level for certain period while DE is supplied, the panel may be damaged.
Note 4) Please adjust LCD operating signal timing and FL driving frequency, to optimize the display quality.
There is a possibility that flicker is observed by the interference of LCD operating signal timing and FL driving
condition (especially driving frequency), even if the condition satisfies above timing specifications and
recommended operating conditions shown in 3.
Note5 ) Do not make tv, tvhd and tvds fluctuate.
If tv, tvhd, and tvds are fluctuate, the panel displays black.
Note6) In case of using the long frame period, the deterioration of display quality, noise etc. may be occurred.
Note7) NCLK count of each Horizontal Scanning Time should be always the same.
V-Blanking period should be “n” X “Horizontal Scanning Time”. (n: integer)
Frame period should be always the same.
Page 6