Filter
Top Products
Matrix Switching System—Instruction Manual Page 19
Example: Close the output ports 03, 05, and 06.
Step 1: First press down the output number keys 03, 05 and 06 to the right
Step 2: Press the Disconnect key
Step 3: Press the previously pressed output number keys 03, 05 and 06 (or press the
Deselect all output key) to complete the operation. The final results will be as shown
below:
Select all output / Deselect all output: Switching Functions
(1) Select all output function is used to select one port for input and all output ports for output.
A specific example of operation is described below:
Example: Using a SW808HD matrix with all input and output ports properly connected to the
equipment. The needed input/output ports should be set to audio/video channel 1 while switching
all output ports to output.
Make sure to select both Video and Audio by checking the boxes in the lower right corner
of the blue box. Then, press the Select all output key and select the input number key
01. Click on the matrix icons along the 01 row to turn them into to
complete the command operation.
. (2) DeSelect all output function is used to close the Select all output functions.