Filter
Top Products
Chapter 3 - Using the Command Line Interface (CLI) 3-17
Vipersat Configuration
Remote Count
The Remote Count menu item in figure 3-16 is an information only display
showing the total number of Remotes that currently belong to the STDMA
group for this Hub modem.
Set Remote Policies
This menu item, which appears for GIR and Entry Channel Hub types, allows
each Remote to be configured for specific data switching conditions. Entering P
at the STDMA Remotes Menu command prompt displays the Remote Policies
screens shown in either figure 3-19 (GIR Hub) or figure 3-21 (Entry Channel
Hub).
Figure 3-19
STDMA Remote Policies screen (GIR Hub)
Entering the Remote number at the command prompt in figure 3-19 allows the
Guaranteed Information Rate and the Automatic Load Switch Rate for that
Remote to be set, as shown in figure 3-20. Note that the Available Bandwidth is
displayed for reference in this screen to assist with entering the appropriate
rates. The cycle length for GIR is limited to a maximum of one second.
Figure 3-20
GIR Remote Policies prompt