Filter
Top Products
Installing the 9Cx14 Chassis
1-4
The Cell Transfer Matrix (installed in the 9C714 chassis only)
The Cell Transfer Matrix provides a Time Division Multiplexed (TDM) based
mesh of full duplex, high speed (1.6 Gbps) dedicated interconnections capable of
carrying standard ATM cell traffic. These interconnections are a series of point-to-
point links between an individual module, and every other module that directly
connects to the Cell Transfer Matrix. If the 9C714 chassis has 14 modules that
connect to the CTM installed, there are 182 point-to-point links between all the
modules, providing a total aggregrate switching capacity of 75 Gbps.
Getting Help
For additional support related to this device or document, contact Cabletron
Systems using one of the following methods:
Before calling Cabletron Systems, have the following information ready:
• Your Cabletron Systems service contract number
• A description of the failure
• A description of any action(s) already taken to resolve the problem (e.g.,
changing mode switches, rebooting the unit, etc.)
• The serial and revision numbers of all involved Cabletron Systems products in
the network
• A description of your network environment (layout, cable type, etc.)
• Network load and frame size at the time of trouble (if known)
• The device history (i.e., have you returned the device before, is this a recurring
problem, etc.)
• Any previous Return Material Authorization (RMA) numbers
World Wide Web http://www.cabletron.com/
Phone (603) 332-9400
Internet mail support@cabletron.com
FTP ftp://ftp.cabletron.com/
Login
anonymous
Password
your email address
To send comments or suggestions concerning this document, contact the
Cabletron Systems Technical Writing Department via the following
email address:
TechWriting@cabletron.com
Make sure to include the document Part Number in the email message.