Filter
Top Products
General Configuration Using Local Management
154 CSX400 and CSX400-DC User’s Guide
IP General Config Screen
The IP General Config screen allows you to configure the CSX400 for IP routing.
Access the IP General Config screen by using the arrow keys to highlight the IP General Config
menu item and pressing ENTER. The IP General Config screen shown in Figure 66 displays.
Figure 66 IP General Config Screen
IP General Configuration Status Fields
The following list describes each of the IP General Config status fields. The status fields are for
informational purposes only and cannot be modified.
Router Name — Displays the type of routing used.
Status — Displays the status of IP Routing.
UpTime — Displays the amount of time elapsed since the last time the CSX400 was rebooted.
Version — Displays the IP Routing version number used on the CSX400.
IP General Config
Router Name: IP
IP Routing: ENABLED
Redirector: FORWARD
UpTime: 0 days 0 hours 39 min
SAVE RETURN
2012_11
Version: XX.XX.XX
Status: Enabled
AdminStatusTime: 0 days 0 hours 39 min
System Level Setup
Server: 0.0.0.0
UDP Port: 37
37 of 999
UDP Type: time
Port Level Setup
Port: 1
MAC Address: 00-00-1D-22-46-B0
Oper Status: Enabled
Description: Ctron CSX400 EnetPort
Interf. Type: ethernet-csmacd
Framing: Ethernet MTU: 1500
IP Routing: ENABLED IP Forwarding: ENABLED Proxy ARP: DISABLED
+PORT- +REDIRECTOR-
Address: 134.141.17.177 Mask: 255.255.0.0 Address Type: Primary
Network Bcast: Ones
CSX 400 Local Management Flash Image Version XX.XX.XX