Filter
Top Products
INSTALLATION
Page 2-13
• Align the adapter so the PC bus edge connector is lined up
with the expansion slot (4) as shown in Figure 2-11.
1
2
3
4
5
Figure 2-11. Installing the E3100 Series Adapter
• Slide the adapter into the guide slots and firmly press, but
do not force, the adapter into the expansion slot. The
plastic clips on the adapter (1, 5, Figure 2-11) will snap into
place as the adapter is inserted into the expansion slot.
• Reinsert the thumbscrew, and replace the PC cover.
Reattach the power and peripheral cables, and power up
the PC.
1. Clip
2. Adapter
3. Edge Connector
4. Expansion Slot
5. Clip