Filter
Top Products
Installation and Power Supply Requirements
80-10100001-09 5–1
5 Installation and Power Supply Requirements
Safety
Warning:
Before connecting the mains supply to the
unit check the supply voltage as detailed
below.
The product is a high density rack mounted unit designed to sit in a 19"
communications cabinet, it has four fixing points, two down each side of
the front of the frame. All four fixing points must be securely fix the
frame.
The unit is supplied with a metal front cover in order to comply with the
European EMC Directive. To comply with the Directive this cover must
be fitted while the unit is operating.
On the rear of the unit there are two IEC mains sockets for connection to
two independent mains supplies. The primary earth connection is made
via these sockets.
Warning - this appliance must be earthed.
Mains cables, 2 metres in length are supplied with the unit. This should
be connected to a suitable mains supply. The mains plug is the primary
disconnect device for the unit. Ensure that the unit is installed near to a
socket outlet and that the outlet is easily accessible.
The mains cables supplied with the unit is fitted with a moulded 13 amp
plug for connection to a standard socket outlet. Should the plug not be of
the correct type for the outlets that it is to be connected to, the plug