Filter
Top Products
Security
6-14 Enabling Security and Traps
Figure 6-5. Channel A Security Window
3. In the Security Mode field, click mouse button 1 on the appropriate selection
to apply Full or Continuous lock status to all ports on the selected repeater
channel, or to Unlock all ports on the channel. (Note that if your SEHI does
not support the newest security enhancements, the Continuous selection will
be unavailable.)
4. In the Send Trap field, click mouse button 1 on the appropriate selection to
Enable or Disable traps for the selected repeater channel.
5. Click mouse button 1 on to save your changes; the new status
will be displayed in each field to the right of the field name. Click on
to exit the window.
Hub-level Security and Traps
Locking ports at the hub level applies all applicable protections (as configured via
the Port Security window) to each port on the selected hub or hubs.
To enable or disable locking and/or traps at the hub level:
1. In the Repeater Security window, click to select the appropriate repeater
interface in the scroll list.
2. Click mouse button 1 on ; the Channel A Module Security
window, Figure 6-6, will appear. Note that the current hub-level settings are
NOTE
If you select a group of hubs whose ports have different security capabilities, you may still
be able to select and apply security states which are not applicable to all ports. Applying
these kinds of settings will have no adverse affect on your network devices: those ports
which can accept the set will do so; those which cannot will either ignore the set or issue a
Set Failed.