Filter
Top Products
Chapter 2:
Connecting to the Network
Page 2-4 Token Ring Switch Module User Guide
To connect to an STP MAU, attach the DB9 end of a Token Ring adapter
cable to the Token Ring module’s DB9 connector. Attach the Media
Interface Connector (MIC), on the other end of the cable, to any port
except
the Ring-In or Ring-Out ports on a STP MAU. The Ring-In/
Ring-Out ports are used for interconnecting MAUs. Refer to the example
shown in Figure 2-2.
Figure 2-2 Connecting a Token Ring Module to an STP MAU
OFFLINE
RING 1
RX ST
RING 2
RX ST
RING 3
RX ST
RING 4
RX ST PROC
TX 16 TX 16 TX 16 TX 16 PWR
QUAD IEEE 802.5 TOKEN RING (STP)
RI RO