Filter
Top Products
3-20
■ Paper Selection Tab
This printer driver supports three custom paper sizes. Using the custom forms defined on the
Forms tab in the Print Server Properties dialog box, you can add information about the
custom paper sizes. Form definitions must conform to the printer’s specifications.
Selected Paper shows the names of the three sizes.
Change Paper opens the Change Paper dialog box. This box contains a listing of the
available papers, and their definitions (Available Paper has Height: 5.00 to 14.00 inches
(127.0 to 355.6 mm) and Width: 3.00 to 8.50 inches (76.2 to 215.9 mm)) that were defined in
the Forms tab in the Print Server Properties dialog box. (The Print Server Properties
dialog box can be accessed by selecting Server Properties from the File menu of the Printers
(in Windows XP/Server 2003, Printers and Faxes) folder.)
Only sizes that conform to the printer’s specifications are listed as available. When you choose
a size in the list and click OK, the size information is copied to the selected paper in the
Selected Paper list on the Paper Selection tab. Click Millimeter or Inch to switch the Unit
of dimensions displayed on the screen.
* Be sure to designate values such that the height is equal to or greater than the width.